Order in and we'll ship it today!
We Accept:

Solar Gas Boosters

Solar Gas Boosters Indoor and Outdoor Models

plumbonline's Continuous Flow Solar Boosters are compatible with all solar hot water systems this includes evacuated tube and flat plate panels. 

The gas booster works in conjunction with any hot water storage tank, the GM-Solar continuous flow burner can be mounted on the tank or indoors. The booster can replace any of the Rinnai, Rheem, Dux solar ready gas water heaters.

As with the rest of or ranges, the Solar Boosters come is NG (Natural Gas) or LPG (Liquefied Petroleum Gas = Bottled Gas)

The Solar boosters are available as Standard (GMS) or High-Efficiency Condensing (GMC) and are factory pre-set for high temperature. When the water from the solar storage tank gets too low the gas booster will fire and heat the water, enabling your solar system to contribute as much as possible solar heated water. The boosters are available in flow rates to suit all domestic and commercial applications.

Solar hot water systems are normally installed outdoors, the burners can be mounted on the storage tank or wall mounted in the conventional manner next to the solar hot water storage tank. If you require an indoor gas burner they must be installed with a flue to exhaust the waste gases.  As with any hot water installation take care to keep the pipe runs to the minimum and well insulated to reduce heat losses.

GM-Solar Continuous Flow systems have the following options available, please see individual models for comprehensive technical and performance information.

  • Internal & External Models
  • Standard Continuous Flow (GMS-Series)
  • High-Efficiency Condensing Continuous Flow (GMC-Series)
  • Minimum 5.6 Star energy efficient rating
  • Adjustable temperature control
  • Anti-Frost
  • GM_Series flue accessories
  • Peace of mind warranty

There are no products listed under this category.