Pump Controller Automatic ReSet Grundfos DAB Bianco 1.5BAR WHI-SK10PPHS2

(No reviews yet) Write a Review
SKU:
WHI-SK10PPHS2
Weight:
1.60 KGS
Shipping:
Free Shipping
  • Pump Controller Automatic ReSet Grundfos DAB Bianco 1.5BAR WHI-SK10PPHS2
  • Pump Controller Automatic ReSet Grundfos DAB Bianco 1.5BAR WHI-SK10PPHS2 - Top View
  • Pump Controller Automatic ReSet Grundfos DAB Bianco 1.5BAR WHI-SK10PPHS2 - Plug & Play IEC Type
  • Pump Controller Automatic ReSet Grundfos DAB Bianco 1.5BAR WHI-SK10PPHS2 - Dimensions
  • Pump Controller Automatic ReSet Grundfos DAB Bianco 1.5BAR WHI-SK10PPHS2 - Technical | Warranty
  • Pump Controller Automatic ReSet Grundfos DAB Bianco 1.5BAR WHI-SK10PPHS2 - at plumbonline
$152.00

Description

Pump Controller Automatic ReSet Grundfos DAB Bianco 1.5BAR WHI-SK10PPHS2

The White International WHI-SK10PPHS2 controllers are devices used to control electric 240V pumps of 1.5kW or less. This pump controller is suited to smaller pumps and applications. The controller monitors both the pressure and the flow. It controls the operation of the pump automatically. Because of its design, there is no need for a separate pressure (expansion) tank, nor is there any need to adjust start and stop pressures as per traditional pressure switches. The unit will protect the pump should the water supply fail (due to blockage in the pipe or tank running dry) and will automatically restart normal operation once water is restored.

WHI-SK10PPHS2 Auto Restart Control

The controller combines the latest technology in pump protection with the reliability of an electro mechanical control system. Through electronic design the control prevents contant pump cycling through constant pressure and flow detection. Further incorporating integrated compact design features that support user friendly installation with the provision of a plug and play
electrical configuration and inbuilt pressure gauge for up stream leakage diagnosis.

Auto Restart Function

When the pump loses prime it will stop working after 20 seconds then restart after 10 seconds and runs for 40 seconds and then stops. Then after 10 seconds runs for another 40 seconds after which if no water is available the pump will turn off for 24 hours repeating the process every 24 hours until water is available.

Features and Benefits

  • Starts and stops the pump automatically when the tap is open or closed. This means the pump does not need to be turned off manually.
  • Maintains a constant pressure from the pump during operation resulting in a reliable water supply.
  • Automatically stops the pump in the situation of no flow (due to inlet pump blockage) and will automatically resume normal operation once the blockage is removed.
  • Automatically restarts the pump in the event of power failure. This gives the homeowner peace of mind that the unit will continue to operate even if they are away for a long period of time.
  • The controller eliminates pressure fluctuations at flows as low as 1L/min.
  • Plug and play leads (IEC type) are installed on the controller so that a licensed electrician is not required to replace the controller.
  • The controller incorporates an inbuilt pressure gauge to enable the homeowner to monitor the system pressure without the need of a separate inline pressure gauge. The pressure gauge can also diagnose nuisance upstream water.
  • Drinking water AS/NZS4020 approved in Australia and New Zealand.
View AllClose

0 Reviews

View AllClose