AVG AIR Eliminator High Temperature Solar hot water AEHT-10

(4 reviews) Write a Review
SKU:
AEHT10AV
Weight:
0.60 KGS
Shipping:
Calculated at Checkout
  • AVG AIR ELIMINATOR HIGH TEMPERATURE SOLAR AEHT-10
  • AVG AIR ELIMINATOR HIGH TEMPERATURE SOLAR AEHT-10 - cutaway
  • AVG AIR ELIMINATOR HIGH TEMPERATURE SOLAR AEHT-10 - Top float
  • AVG AIR ELIMINATOR HIGH TEMPERATURE SOLAR AEHT-10 - O ring seal
  • AVG AIR ELIMINATOR HIGH TEMPERATURE SOLAR AEHT-10 - Top plate
  • plumbonline AVG - Australian valve Group
$79.20

Description

AVG AIR ELIMINATOR HIGH TEMPERATURE SOLAR AEHT-10

AVG in consultation with the solar industry has developed a high temperature automatic air eliminator to handle the extreme conditions of the Australian summer. Automatic air eliminators are usually fitted at the highest point of the flow and return plumbing installation to remove any air from the circulating pumped system. With solar manufacturers in Australia and around the world developing more efficient solar collectors it has become necessary to come up with an automatic air eliminator able to cope with extremely high stagnation temperatures within the solar collector. When the ground mounted storage hot water cylinder reaches the preset thermostat temperature setting the pump is turned off and the water within the solar collector can get extremely hot. This condition is called stagnation and solar collectors can reach temperatures up to 200°C.
These high temperatures have made it difficult to use the standard air eliminators currently on the market because they contain polymer components which can melt in this high temperature environment.

AVG has developed the AEHT-10 automatic air eliminator suitable for solar installations to cater for these high stagnation temperatures. The AEHT-10 has no polymer components and is designed to handle temperatures in excess of 200°C.

The AEHT-10 has a copper float and DR brass components to comply with the Australian standards. All the “ O ” rings and seals used within the AEHT-10 are high temperature Viton.

The AEHT-10 is suitable for all plumbing installations where an automatic air eliminator is required to expel air from the piping system.

 

AEHT-10 SPECIFICATIONS

  • BODY - CHROME PLATED DR BRASS
  • FLOAT - NICKEL PLATED COPPER
  • SEALS and “ O ” RINGS - HIGH TEMPERATURE VITON
  • INLET - R 3/8” ( BSP tapered )
  • MAX TEMPERATURE - 230°C
  • MAX PRESSURE - 1000 kPa
View AllClose

4 Reviews

  • 5
    Great

    Posted by dave on 23rd Jul 2018

    very good unit works fine, bought this one to replace the same as at -7 degree the unit iced up and cracked lid with expansion on the old one.

  • 3
    needs directions

    Posted by Jim dowling on 9th Jul 2018

    It needs directions re adjustment of top screw

  • 5
    Best product & price

    Posted by Owen on 12th Oct 2017

    Was better than the one I replaced & at a verry good price.

  • 5
    solar safety valve

    Posted by GPA on 6th Jan 2016

    Works great - bought this to replace one of same that no longer worked

View AllClose