How to Choose the Right Pressure Pump | DAB Jetcom 62M 82M 102M 132M Guide

How to Choose the Right Pressure Pump for Your Home Jetcom 62M, 82M, 102M & 132M Explained

Choosing the right pressure pump isn’t always straightforward. On paper, most pumps look similar until you install one and realise it doesn’t quite keep up.

At plumbonline, we get this question all the time: “Which pump do I actually need for my setup?”

Whether you’re running a rainwater tank, supplying a house, or setting up irrigation, the key is matching the pump to how your system is actually used, not just the specs on the box.

This guide breaks down the DAB Jetcom pump range in practical, real-world terms so you can make the right call first time.

What actually matters when choosing a pump

There’s a lot of technical data out there, but for most homes it comes down to three things:

Flow (L/min) – how much water the pump can deliver
Head (metres) – how much pressure it can push
Demand – how many outlets you’ll run at once

In simple terms:

More taps running = more flow required
Longer pipe runs or double storey = more pressure required

Jetcom pump range – real-world guide

Here’s how the Jetcom range stacks up based on typical Australian households.

Jetcom 62M – small and simple setups

45L/min | 42m head

If you’re running a smaller setup, the 62M is a solid, no-fuss option.

Typical use

Toilet and tap
Washing machine
Small rainwater systems

Best suited for

1–2 outlets running at once

If you’re in a granny flat or smaller home, this is often all you need.

Jetcom 82M – the everyday all-rounder

60L/min | 47m head

This is where most standard homes sit.

Typical use

Bathroom, kitchen and laundry
Light irrigation
General household supply

Best suited for

2–3 outlets running at once

If you’re unsure, this is usually the safest starting point.

Jetcom 102M – when pressure matters

60L/min | 53.8m head

Same flow as the 82M, but with more push behind it.

Typical use

Double storey homes
Long pipe runs
Higher pressure showers

Best suited for

2–3 outlets with higher pressure demand

If your tank is a fair distance from the house, this is where you step up.

Jetcom 132M – bigger demand systems

80L/min | 48m head

When you need more water, this is the go.

Typical use

Multiple bathrooms
House and irrigation
Higher demand setups

Best suited for

3–4 outlets running at once

Ideal for larger homes or when everything seems to run at once.

Pairing with a pump controller

Most modern setups pair these pumps with an automatic controller like the Bianco NXT BIA Lite.

This means:

The pump starts and stops automatically
You get consistent pressure
Dry run protection helps prevent damage

It basically turns your pump into a set and forget system.

Where people get it wrong

The most common issue we see is undersizing.

It might work fine with one tap, then someone turns on a second and the pressure drops off.

Other factors that can affect performance:

Pipe size
Distance from tank to house
Elevation (height difference)
Fittings and restrictions

This is why two houses with the same pump can perform very differently.

Quick selection guide

If you just want the short version:

62M → small setups, 1–2 outlets
82M → standard homes, 2–3 outlets
102M → higher pressure or longer runs
132M → larger demand, 3–4 outlets

Need a hand?

If you’re not quite sure, feel free to reach out.

At plumbonline, we deal with these setups every day and can help point you in the right direction without overcomplicating it.

Final word

The Jetcom range is a proven option for domestic pressure systems, but like anything, it comes down to choosing the right size for the job.

Get that right and everything else falls into place.