Description
Solar Hot Water System Pump Station | Grundfos 15-20CIL2 | Senztek SolaStat 1-3 Kit
We have built our Pump Station Range to suit most configurations and replacement scenarios. The pump stations can be supplied with the two versions of the Senztek controller (SolaStat ST 1-3 or SolaSmart Plus) with or without the sensors. We also supply the pump stations complete with the High Temperature Non Return Valve and Flow Meter and lastly with or without pump unions. This way you can select the most cost effective configuration to suit your system. plumbonline stock all the parts so we are ready to ship FREE to your door, getting you back in hot water as quickly as possible.
The Solar Hot Water System Pump Station can be installed with most domestic solar hot water systems, you should always ensure that the sensors are compatible with your controller.
What do you get?
- One (1Qty) Weather Proof Stainless Steel Pump Station Enclosure
- One (1Qty) Grundfos 15-20 CIL 2 Pump
- One (1Qty) Set of Grundfos 25mm x 15mm Copper Pump unions with gaskets
- One (1Qty) Senztek SolaStat ST 1-3 Solar Hot Water Controller
- One (1Qty) 3m Tank Inlet Sensor
- One (1Qty) 3m Tank Inlet Sensor
- One (1Qty) 20m Teflon/PVC Plug In Roof Sensor
- One (1Qty) Non Return Valve High Temp for Solar Hot Water 15F-15C
- One (1Qty) Solar Hot Water Flow Meter 15mm 1-2.5L/min
- plumbonline's rapid order turnaround, even for late afternoon orders
- Australia Post delivery to your door
Solar Hot Water Controller - SolaStat ST 1-3
The SolaStat ST 1-3 can be found in the majority of solar hot water system in use. This is a "Like for Like" swap.
BUILT WITH THE SIMPLE INSTALLATION IN MIND
- Plug and play pump station with plug in roof sensor
- Pre-wired with pre-programmed settings
EASY DIAGNOSTICS
- LED indicators for fault conditions
- Push button for pump activation
BUILT FOR LOCAL CONDITIONS
- Controller – IP54 water resistant, UV A & B enclosure
- Pump - low energy B-class technology, resistant to short temperature peak of up to 140°C
WORLD CLASS SOLAR PUMP INCLUDED
- Robust, durable and temperature resistant
- Suitable for water / glycol mixtures and coolants
Grundfos SOLAR 15-20 CIL2 Open Loop Solar Hot Water Pump 240V
The Grundfos SOLAR 15-20 CIL2 included with every pump station gives you a robust pump ready to install on your solar hot water system. The 15-20 CIL is optimised for domestic Open Loop solar systems both in terms of performance and choice of materials. For instance, the pump is able to resist a higher level of chloride than normal pumps. The 15-20 CIL2 can be used as a replacement pump for all open loop solar systems, both flat plate & evacuated tube types from all major manufacturers.
Description
- 3 speed asynchronous circulator
- 25mm Male ports
- Medium temperature: - 25... + 110°C
- Head: Up to 2,3 m
- Flow: Up to 1,8 m³/h
- To be installed in Open Loop solar thermal systems
The Solar Hot Water System Pump Station can be installed with most domestic solar hot water systems, you should always ensure that the sensors are compatible with your new controller. You may also have to alter the pipework to accomodate the station but with its small dimensions this should be simple. Below we have listed the more common brands that the pump station would suit, during the height of the Government Rebates there were a number of smaller companies who entered the market the spare parts are mostly compatible, if you are unsure please call us on 1300 428 999
Flat Plate Solar Hot Water Systems
- Chromagen | Dux | Edwards | Rheem | Rinnai
Evacuated Tube Solar Hot Water Systems
- AAE | Apricus | Edson | Hills | Solarark | Solarlord
