Description
High Temperature Roof Sensor for SR868C6 Solar Hot Water Controller - 1.5M
plumbonline are pleased to announce we are extending our solar hot water spare parts catalogue We have all the major spare parts for your solar hot water service wether it be flat plate panels or evacuated tubes. The solar hot water parts range is now online and ready to order with complete tech specs to ensure your seamless selection. If you’re unsure which part suits, plumbonline has a committed team of specialists with over 30 years of solar hot water selection experience.
Overview
The High Temp PT1000 sensor for the SR868C6 solar hot water controller was widely used across the industry, please check the detail is the same as your controller.
- 1.5 M Approx length
- PT1000 Thermistor
- High Temperature
- Stainless steel cap
- Sensor 6mm x 50mm long
- Silicon Cable
Positioning the Roof Sensor
The PT1000 sensor should be fitted into a metal immersion ‘pocket’ in the manifold or panel sensor pocket or hot water outlet pipe. Apply plenty of heat transfer compound between the sensor and the lining of the pocket. Seal the sensor with neutral cure sealant and install external lagging. CARE! the cable should also be insulated from the bare copper pipe.
2 Reviews
-
Found it to be very affective worked straight away hope it will last.
Very happy with it.
-
Fantastic Service
Thank you A+
