Description
Motor Start Capacitor 72–88 µF 330VAC with End Cap, Mounting Bracket & Discharge Resistor
Motor start capacitor with end cap mounting bracket and discharge resistor. Rated for single-phase motor start circuits across HVAC, refrigeration, pool pumps, and appliances. Match the µF and voltage from your existing cap or motor label.
What do you get?
- 1 x Motor Start Capacitor 72–88 µF 330VAC with End Cap, Mounting Bracket & Discharge Resistor
- FREE delivery to your door!
Not sure if this is the right part?
- Look at your existing capacitor the µF (MFD) value and voltage (VAC) are printed on the label
- Match the µF range shown start caps have a range (e.g. 88–108 µF), not a fixed value
- Always match or go higher on voltage never lower
- If your appliance hums but won't start, or trips the overload on start-up, a failed start cap is the most common cause
- If you're unsure, call or email Plumbonline we're here to help you get the right part
For trade technicians?
- Cross-reference by supplier PN (HYSC2K / HYSC3K series) or Plumbonline SKU
- Capacitance tolerance: ±20% acceptable as like-for-like replacement per OEM tolerance ranges
- Discharge resistor fitted safe for use in circuits with potential relay; resistor safely bleeds charge after drop-out
- P1 Safety Class meets standard for motor start capacitor protection classification
- Operating frequency: 50–60 Hz suits Australian 50Hz mains
Important Notes
- Non-Refundable Items: Printed Circuit Boards, Ignition Parts, and Valves are shipped in tamper-evident satchels and non-refundable once opened.
- Refund Conditions: Refunds are only issued for unopened items returned in their original tamper-evident satchel. Refer to T&Cs
- Professional Installation Required: Gas, water, and electrical parts/appliances must be installed by a qualified professional to ensure safety and maintain warranty validity.
Ensure you select the correct part before purchase. Contact customer support for any assistance or compatibility questions.
