Description
AVG Noise Reduction Valve 20mm Female x 20mm Male
Water hammer through your washing machine waking the baby or simply annoying the neighbours in the apartment above? The use of the Quiet Valve also reduces the risk of burst hoses or appliance failure due to pressure fluctuation.
Get the solution delivered to your door for the simplest of installations!
Installation Instructions
- STEP 1: Turn off the washing machine tap and unscrew the hose if connected.
- STEP 2: Screw the Quiet Valve onto the end of the tap where you removed the hose using the sealing washer provided. NOTE : No thread seal tape is required.
- STEP 3: Re-fit the washing machine hose to the Quiet Valve and ensure that the strainer and seal are centrally aligned inside the attaching washing machine nut to prevent any obstruction to the flow.
Specification
- Model no. QPL-20
- Maximum inlet pressure: 1400 kPa
- Maximum temperature: 65ºC
- Outlet pressure: 400kPa at 700 kPa inlet
- Flow rate: 20 litres/min at 700 kPa inlet
- Top connection: 20mm ( ¾” ) BSP female
- Outlet connection: 20mm ( ¾” ) BSP male
Note - As the Quiet Valve is a pressure and flow restricting device, the cycle times for washing may increase. If the device being protected has both hot and cold inlets connected, then a Quiet Valve may be required on both hot and cold connections.
